Click on the image to check the artwork
It’s suitable for C/D grade lighting-proof, installed on the joint of LAZO or LPZ1 and Lpz2 zone, which protects the electric network not shocked by the thunder and lighting, it usually installed in household distribution boards,computer equipment , telecom equipment ,elevator equipment , frequency conversion equipment,operating room, custody room, electronic equipment etc. And in the socket box in front of control equipment, also applied for below 6 floor household and small villadom.
Techical Parameters |
ANT1-C |
|||||
Protection Level C,D Grade |
C,D |
|||||
Rated Operating Voltage Uc(V~) |
220V,380V |
|||||
Maximum Continuous Operating Voltage Uc(V~) |
140V |
275V |
320V |
385V |
420V |
550V |
Voltage Protection Level Up(V~)KV |
≤0.8 |
≤1.5 |
≤1.5 |
≤2.0 |
≤2.1 |
≤2.5 |
Nominal Discharge Current In(8/μ 20μ s)KA |
20,10 |
|||||
Maximum Discharge Current Imax(8/μ 20μ s)KA |
40,20 |
|||||
Response Time ns |
≤25 |
|||||
Operating Environment(℃) |
-40℃~+85℃ |
|||||
Max Connection Line |
35㎡ copper line |
|||||
Recommend Connection Line |
16m㎡/25m㎡ copper line |
|||||
Installation |
32A |
|||||
Material of Outer Covering |
Standard Rail 35mm |
|||||
Applicaiong Scope and Installation Position |
Streng fhnd-refardant nylon |
|||||
